🕶 New Season, New Shades! ☀ Upgrade your look with the hottest sunglasses of Spring/Summer 2025!
Sales 365 Days Logo
Wireless Mic Belts Cable Discs Management Tabs, Tan, 50-Pack
Adorama.comBy Adorama.com
IN
Wireless Mic Belts

Wireless Mic Belts Cable Discs Management Tabs, Tan, 50-Pack

Cable Discs are designed for the organization and cable management needs of live performance professionals. Made with low-profile Self-Securing Closure Brand hook and loop materials, they're ideal for securing thin, lavalier microphone cables.
Used along with a WMB Belt Pac, the Cable Disc can secure excess cable directly to transmitter that will stay contained throughout wireless prep and performance. Cable Discs can be used outside the performance schedule for organization and storage needs, with a label surface that's writable with Sharpie or permanent marker.
A silver Sharpie is included with the purchase of the Cable Discs - 50 Pack.
$42
Custom Shipping
Secure Purchase
SKU: b2af72801f730fb2f3739c9f66e579fa

You might also like

IN
Lectrosonics Digital Hybrid UHF Belt Pack Transmitter, Frequency Block 25

Lectrosonics Digital Hybrid UHF Belt Pack Transmitter, Frequency Block 25

The LMa combines an excellent feature set with superb performance in a classic Lectrosonics wireless belt-pack transmitter at a modest cost. 24-bit digital audio is combined with optimized FM to create unprecedented audio quality and RF performance. The RF transmission is an aggressively optimized FM system with +/-75kHz wide deviation for a high audio signal to noise ratio and wide dynamic range. When matched with a Lectrosonics digital hybrid receiver, the system will deliver a full bandwidth, flat audio frequency response up to 20kHz with extremely low distortion. Compatibility with earlier analog Lectrosonics receivers and even some receiver models from other manufacturers is provided by firmware emulations built into the DSP code. A simple procedure using the frequency and power switches selects the desired operating mode. The innovative servo bias input and standard 5-pin connector provides a programmable, regulated voltage to accommodate a wide variety of electret microphones. It is no longer necessary to install resistive pads for some mics to prevent overload of the input stage, divide the bias voltage down for some low voltage mics or reduce the limiter range at minimum gain settings. To simplify wiring connectors, a single configuration, optimized for the LMa, is now available for all microphones. An alternate wiring configuration is also available that works well with the 5-pin inputs on the LMa and earlier Lectrosonics transmitters. A DSP-based pilot tone system generates one of 256 different ultrasonic tones between 25 kHz and 32 kHz to ensure that the receiver remains muted (squelched) until it receives the pilot tone from the matching transmitter. Even when a competing RF signal is present on the carrier frequency, the receiver will remain squelched. The pilot tone squelch also eliminates noise and interference from spurious RF generated by other transmitters in the same multi-channel system.Digital Hybrid Wireless is a revolutionary new patented design that combines digital audio with an analog FM radio link to provide outstanding audio quality and the extended operating range of the finest analog wireless systems. The design overcomes channel noise in a dramatically new way, digitally encoding the audio in the transmitter and decoding it in the receiver, yet still sending the encoded information via an analog FM wireless link. This proprietary algorithm is not a digital implementation of an analog compandor. Instead, it is a technique which can be accomplished only in the digital domain, even though the audio inputs and outputs are analog signals. The process eliminates a compandor and its artifacts.The LMa is powered by a single 9V battery and provides 50mW of RF output for extended operating range. The battery door rotates to open and close and remains attached to the transmitter housing. Alkaline, rechargeable LiPolymer and lithium battery types may be used. The housing is machined aluminum, powder coated and laser engraved...

Brand: LectrosonicsCustom Shipping
$183
IN
Lectrosonics IFBT4 Frequency-Agile Transmitter, Block 22: 563.20- 588.70MHz

Lectrosonics IFBT4 Frequency-Agile Transmitter, Block 22: 563.20- 588.70MHz

It's the Lectrosonics IFBT4 Frequency-Agile Compact Transmitter, a high-tech, professional-grade device designed specifically for broadcast, motion picture, theater, and stage applications. This compact transmitter is renowned for its extended operating range and superior audio quality, making it an essential tool in the audio equipment industry. The IFBT4 transmitter can function as a standalone device or be seamlessly integrated into popular intercom systems. It utilizes the innovative Lectrosonics Digital Hybrid Wireless U.S. Patent 7,225,135 systems, which digitally encode the audio in the transmitter and decode it in the receiver, all while transmitting the encoded information via an analog FM wireless link. This unique digital algorithm, exclusive to the digital domain, ensures the highest audio quality, free from the artifacts of an analog compandor.This frequency-agile transmitter operates within a frequency range of 563.2-588.7 MHz, offering 256 UHF frequencies in 100kHz steps. This broad range provides exceptional flexibility, making it easier to coordinate frequencies in multi-channel wireless systems and avoid interference from external RF signal sources and noise. The IFBT4 transmitter is equipped with a microprocessor control for user-friendly operation and transient elimination at turn-on and turn-off. The transmitter output is muted in the TUNE mode to prevent interference in other wireless systems during frequency changes. In the XMIT mode, the output is activated, and the frequency remains constant.With a robust output power of 250 mW, this compact transmitter, when paired with an efficient antenna, provides an impressive operating range with the R1A belt-pack receiver. Its signal can penetrate various surfaces and reflect efficiently, extending the operating range and reducing the need for critical antenna positioning.The IFBT4 transmitter features a backlit LCD display for easy visibility in dimly lit conditions or direct sunlight. It also includes DIP switch settings on the rear panel for direct compatibility with RTS and Clear Com intercom systems. The preamp stage in the input stage allows for direct connection to dynamic microphones in standalone applications, and the direct output at studio line level can be fed directly into the transmitter.Constructed from rugged, machined aluminum with an electrostatic powder coating and an anodized finish, this transmitter is built to last. It operates on 6 to 18 Volts DC via a locking connector and comes with a detachable, locking 1/4 wavelength flexible, galvanized steel cable whip antenna that connects to a 50 Ohm BNC connector on the rear panel. In summary, the Lectrosonics IFBT4 Frequency-Agile Compact Transmitter is a high-tech, professional, and reliable solution for all your wireless audio transmission needs.

Brand: LectrosonicsCustom Shipping
$1299
IN
Laird 500' UHD Cable Assembly, Neutrik rearTWIST BNC & Belden Mini RG59 1855A

Laird 500' UHD Cable Assembly, Neutrik rearTWIST BNC & Belden Mini RG59 1855A

Let the Laird RTBNC-1855-500 4K/8K UHD Cable Assembly, equipped with Neutrik rearTWIST UHD BNC connectors and Belden Mini RG59 1855A, elevate your video applications to new heights. Designed specifically for high-resolution 4K and 8K video applications, this durable and high-quality cable ensures seamless transmission of data over extended bandwidths. The Neutrik rearTWIST UHD BNC connectors are engineered to provide increased headroom, offering an additional return loss reserve. This feature compensates for potential impedance deviations that may occur due to cable bending, incorrect connector assembly, or faulty connection interfaces, ensuring uninterrupted signal transmission. The unique rear twist technology simplifies the insertion and removal of recessed BNC panel connectors, making it an ideal solution for easy patch bay interface. The need for a special BNC removal tool is eliminated, as the rear boot twist mechanism allows for effortless handling. The cable assembly incorporates a 23AWG Belden sub-miniature coaxial cable, renowned for its reliability and flexibility. It features a solid .023" bare copper conductor, gas-injected foam HDPE insulation, and a Duofoil plus tinned copper braid shield with 95% coverage, all encased in a robust PVC jacket. This versatile Laird cable assembly, with its impressive length of 500 feet (or 152.4 meters), is perfect for professional video setups requiring long-distance signal transmission. Custom lengths are also available to cater to your specific needs. Experience the difference in quality and performance with the Laird RTBNC-1855-500 4K/8K UHD Cable Assembly.

Brand: LairdCustom Shipping
$259.49
IN
Godox Virso SRX Dual-Channel Wireless Receiver w/ Multi Interface Shoe (2.4 GHz)

Godox Virso SRX Dual-Channel Wireless Receiver w/ Multi Interface Shoe (2.4 GHz)

What sets the Virso SRX Dual-Channel Wireless Receiver apart is its innovative design and superior functionality, making it an essential tool for all your audio recording needs. This device, operating at a frequency of 2.4 GHz, is the epitome of convenience and quality, offering a cableless and compact solution for capturing high-quality audio, making it perfect for a variety of applications including interviews, vlogs, commentaries, and documentaries.The Virso SRX is engineered with a unique hotshoe mount, designed specifically to slide directly onto the Multi Interface shoe of Sony cameras. This feature not only ensures a stable connection but also delivers superior audio quality, surpassing the capabilities of traditional 3.5mm cable connections. Key features include a hotshoe connection, internal recording, noise cancellation, super LOS range, Hi-Fi sound quality, and screen rotation.Equipped with three built-in microphones in the receiver, the Virso SRX (Sony version) is capable of capturing high-quality audio from all angles. This eliminates the need for an extra receiver, making it an ideal solution for capturing the essence of both the subject and the person behind the camera.The Virso SRX also boasts an ultra-long battery life, offering up to 17 hours of operation for the receiver on a single charge. Furthermore, its wireless system ensures high-quality audio recording with an impressive 650ft (200m) extended transmission distance, making it an excellent choice for outdoor shoots and large spaces.This device is a one-stop solution for all your recording needs, offering a wide range of functions designed to simplify your recording process. These include denoise, one-press mute, screen rotation, one-press pair, mono/stereo mode, and volume setting.For those not using Sony cameras, the standard version of Virso is available. This compact device is highly compatible with various devices, making it an ideal choice for filmmakers, vloggers, journalists, and anyone seeking high-quality audio without the need for bulky equipment. With the Virso SRX Dual-Channel Wireless Receiver, you can expect nothing less than exceptional audio quality and convenience.

Brand: GodoxCustom Shipping
$35