You might also like

IN

BISSELL Separator Assembly for Select Canister Vacuums 1618601

Separator Assembly for the BISSELL Pet Hair Eraser Canister, Series 2230, and SmartClean Canister Vacuum, Series 2268. To clean the Separator follow these instructions: Turn the Separator system counter-clockwise to release and remove from the tank. The Separator system can be rinsed to clean. Let dry for 24 hours before replacing Replace Separator system and turn clockwise to lock in place. Separator Assembly for Select Canister Vacuums 1618601

Brand: BISSELLCustom Shipping

$31.44

IN

BISSELL Hand Vacuum Assembly for Select Stick Vacuums 1627574

Hand Vac Assembly for Select BISSELL Stick Vacuums, including ICONPET TURBO EDGE Cordless Stick Vacuum, series 3177. Hand Vacuum Assembly for Select Stick Vacuums 1627574

Brand: BISSELLCustom Shipping

$199.49

IN

BISSELL Upper Handle w/ TurboBrush Holder for PowerSwift 1610284

Upper Handle Assembly with the TurboBrush Holder for the PowerSwift Upright Vacuum Cleaner. Upper Handle w/ TurboBrush Holder for PowerSwift 1610284

Brand: BISSELLCustom Shipping

$24.62

IN

BISSELL Pet Hair Brush Roll for Select Stick Vacuums 1616333

The Pet Hair Brush Roll fits Select Stick Vacuums including Adapt Ion and PowerLifter Ion Stick Vacuums, Series 2286, 2387, 2482. To maintain the brush roll follow these instructions: Make sure the vacuum is OFF. Press the vacuum foot release button to disconnect it from the vacuum. Turn the foot over and locate the Brush Roll Cover Tab, use a coin to remove the brush roll cover tab by turning counter-clockwise to unlock. Slide the tab down to remove and lift the cover piece. Grasp the brush roll to remove it from the foot window area. Clean off hair and debris from brush.. Place cleaned brush roll back into foot of unit and use a coin to turn lock clockwise to lock into place. If the brush roll stops spinning due to debris, the LED light will turn solid red. Always be sure the Brush Roll Cover Tab is locked into place to avoid breaking or having a faulty brush roll. Pet Hair Brush Roll for Select Stick Vacuums 1616333

Brand: BISSELLCustom Shipping

$22.41

IN

BISSELL Hard Floor Tool with Brush for Canister Vacuums 1602090

Hard Floor Tool for Select BISSELL Canister Vacuums, this part does include the brush as well. Fits Hard Floor Expert, Series 1161 Hard Floor Tool with Brush for Canister Vacuums 1602090

Brand: BISSELLCustom Shipping

$36.23

IN

BISSELL Dusting Brush for Select Vacuum Cleaners 1623104

Dusting Brush for Select Vacuum Cleaners, including the Pet Hair Eraser Corded Slim Vacuum Cleaner, series 2897, and CleanView Pet Slim Corded Vacuum, Series 2831 and 3070. Dusting Brush for Select Vacuum Cleaners 1623104

Brand: BISSELLCustom Shipping

$23.96

IN

BISSELL Handle Assembly for Hard Floor Expert Canister Vacuum 1602083

Handle Assembly fits the Hard Floor Expert Canister Vacuum - Model 1161. Handle Assembly for Hard Floor Expert Canister Vacuum 1602083

Brand: BISSELLCustom Shipping

$33.14

IN

BISSELL Pre-Motor Foam Filter for Select Canister Vacuums 1613054

Pre-Motor Foam Filter for Select Canister Vacuums including Zing Bagless - Series 2156. This filter is washable. Wash with warm water and mild detergent and allow to completely air dry prior to next use. It is recommended to replace with new filters every 3 to 6 months depending on use and how often it is cleaned. Clean filters keep the suction power at optimal levels. Dirty filters will restrict the air flow and greatly reduce suction power. Pre-Motor Foam Filter for Select Canister Vacuums 1613054

Brand: BISSELLCustom Shipping

$21.72