BISSELL Hard Surface Brush Roll JetScrub 1621145

Hard Surface Brush Roll for the BISSELL JetScrub Pet Carpet Cleaner, Series 2529. This Brush Roll must be used with the Hard Surface Nozzle part # 1620856 ONLY! Follow these instructions for cleaning and replacing the brush roll and chamber: Grasp Brush Roll Nozzle on both sides and pull upward to remove Pull Brush Roll out by grabbing the Brush Roll tab and pulling upward Rinse your Brush Roll and Brush Roll Nozzle with warm water. The nozzle Clean Out tool can be used to remove hair and debris. Note: These parts are not dishwasher or automatic washing machine safe. If your Brush Roll Chamber is dirty, clean with a rag or towel Let your Brush Roll and Brush Roll Nozzle dry before reassembling Replace Brush Roll by inserting the Brush Roll end into the right side of the foot. Then lock the pull tab into place by pressing downward Replace the Brush Roll Nozzle by first lining up both Brush Roll Nozzle tabs with the edges of the foot. Then press the nozzle back into place until you hear a "click." Hard Surface Brush Roll JetScrub 1621145